While a puddle of water and soaking wet dress are certain signs of draining bug, sometimes the cause isn't then clear. Why is my Maytag front load washer not draining? A chock-full drain hose can block water from flowing, causing backups in the washer. Apply these Maytag front load washer troubleshooting tips to quickly resolve draining issues.

How to Fix a Maytag Front Load Washer Not Draining

Most draining problems are due to obstructions or part malfunctions. We'll detail how to make up one's mind if a Maytag front load washer not draining needs a DIY gear up or professional person repair. But, start, here'due south how to remove excess water from your washing machine.

Manually Drain H2o From Washer

Draining issues create one of the biggest Maytag front load washer bug: how to remove excess water without making a mess. Earlier assessing for a clog or part malfunction, any water should exist manually drained to minimize leaks.

Here's how to manually drain water from a Maytag washing automobile :

  • Pull the washer away from the wall and plough off its power and water connections.
  • Scoop out any remaining h2o in the washer drum.
  • Unhook the drain hose from the wall or sink drain and empty residual water into a bucket.
  • Clench the open up end of the hose to prevent additional spillage while y'all work.

Drain Hose Is Obstructed

An obstructed drain hose is one of the almost common reasons a Maytag washer won't drain. Both kinks and blockages tin obstruct the hose, preventing proper draining. A kinked hose can be gently straightened to restore part. However, if your washing machine is leaking , the kink may take damaged the hose, necessitating replacement.

Blockages are typically caused by a buildup of debris or a trapped habiliment. If the blockage isn't visible when draining the outer drain hose, you'll need to assess the inner portion of the hose.

Follow these steps to unclog the inner drain hose :

  • Remove the washer'southward front panel by unscrewing the two mounting screws. Pull the panel edges out earlier unhooking the pinnacle.
  • Spread a towel under the bleed hose earlier unclamping information technology from the drain pump.
  • After water is tuckered, audit the hose for blockages and remove them with pliers.
  • If no blockages are visible, unclamp the hose from the tub end to check for and remove obstructions.
  • Reconnect the inner hose to the pump and tub.
  • Replace the washer's front panel.
  • Reconnect the outer hose to the bleed, making certain the cease of the hose is xxx-96″ to a higher place the floor for proper draining.
  • Restore water and power connections earlier repositioning the washer.

maytag front load washer not draining

Need to Clean Drain Pump Filter

A clogged pump filter could also be responsible for a Maytag washer not draining. As the wash h2o drains, the filter screens out debris to foreclose it from clogging the bleed pump. If the filter becomes clogged, water can't flow to the drain pump and leave the washer.

Here'south how to clean a Maytag washer drain pump filter :

  • Remove the washer'southward front end panel.
  • Identify a towel under the drain pump filter.
  • Slowly plow the filter cap counterclockwise, controlling the menstruum of h2o as it drains.
  • Pull out the filter and rinse nether running water to remove residue and debris.
  • Use a newspaper towel to wipe away whatsoever buildup from the filter housing.
  • Replace the drain pump filter and twist clockwise to secure.
  • Replace the washer's front panel.

maytag washer won't drain

Image from Sears PartsDirect

Faulty Washer Components

Is your Maytag forepart load washer not draining fifty-fifty after assessing for clogs? Chances are a faulty washer component is responsible.

These part failures tin result in draining issues and require a professional washing machine repair :

  • Door lock : Secures the washer door later on its closed, signaling the washer to begin operating. If the lock is damaged or multimeter testing confirms a lack of continuity, you'll notice your washer not spinning or draining.
  • Drain pump : Expels water from the wash tub into the drain hose. Blockages such as clothing or droppings can preclude the pump from working properly and must exist removed to restore function. All the same, if there are no obstructions, the pump is likely faulty and unable to bleed water from the washer.

The team at Oak Valley Appliance can prepare a Maytag front load washer not draining or resolve any other washer issue. Schedule your expert repair today!